Multiaxial materials testing machines

Zwick can supply a variety of solutions for multiaxial materials testing. Materials testing machines with torsion drive enable fast, precise biaxial testing (tensile or compression combined with torsion) of materials or components up to 10,000 Nm.

As well as tests on artificial ball-and-socket joints and bone-replacement material, torsion tests are also performed on items such as clutch discs, steering shafts and camshafts .

Zwick's product range also includes biaxial testing machines from 1kN to 250kN. These machines have four separate drives which can be controlled either via master/slave operation or independently of each other via the relevant testControl measurement and control electronics.

Biaxial testing machines are especially suitable for component testing, use in research and for complex individual test sequences.



Máy kiểm tra độ xoắn tĩnh

Hiện có các bộ truyền động xoắn từ 2 - 2,000 Nm (Torsion drives from 2 to 2,000 Nm) dùng để kiểm tra độ xoắn trên vật liệu hoặc linh kiện. Zwick cung cấp các loại máy thí nghiệm cho các nhu cầu khác nhau, bao gồm cả về các tùy chọn lắp đặt.


Máy thí nghiệm hai trục

A distinctive feature of materials testing is the biaxial tensile test or two-axis tensile test, used to determine the deformation properties of materials It is primarily employed in research and development, as it allows defined stress values to be set and investigated at the intersection point of the specimen.


VPĐD TT Zwick Asia tại Việt Nam
Tel.  +84 - 8 38120 545
E-Mail  info@zwick.vn

Bản Tin

Đăng ký ngay để nhận bản tin quốc tế của chúng tôi